National Scrapbook Day Layouts – Part 2

Hello!  I’m back with three more layouts that I made from Creative Memories 2020 National Scrapbook Day Kit.  Please see my post from Friday, August 7th for my first layout.  The National Scrapbook Day Kit is super sweet and still available for purchase.  Please use my CM link to order.  Click on Shop and then Virtual Events on the top menu bar to find the kit.  You may wish to purchase the Bundle as you will also get the extra embellishments that I used for my layouts.

I used up almost all of the paper, stickers and embellishments from the NSD kit to make my four layouts.  Please read the instructions carefully, so you’ll have enough materials to make all four layouts.   To make the second layout that I’m sharing today, you’ll need a piece of reserved paper that you cut from my first layout from August 7th (Step 1).

KarynCropsNSDLayouts - Page 011

For my second layout, I created a woven basket piece as a background with the strawberry print paper to highlight a special photo from my granddaughter’s first birthday party.  The circular piece created with the Floral Circle Punch reminds me of the crocheted doilies that my grandmothers used to create.

KarynCropsNSDLayouts - Page 010

 

To create my layout:

1.  Cut a hollow frame from a sheet of Scarlet Cardstock.  Set aside the cut out square to use for the next layout.  Cut the strawberry paper to 11-1/2″ x 11-1/2″ and adhere over the hollow frame.
2.  Cut strips of the dark green and light green papers to 7/8″ x 6″  and 7/8″ x 10-1/8″.  Cut strips of White Cardstock to 1″ x 6-1/8″ and 1″ x 10-1/4″.  Adhere the green strips on top of the white strips.
3.  Evenly position the shorter dark green pieces in the lower center part of your page, and adhere the tops of the pieces with Tape Runner.  Weave through the longer light green pieces, and slide the three long pieces until they’re evenly spaced. Adhere the ends with Tape Runner.  Adhere the bottoms of the dark green pieces.
4.  From Evergreen Cardstock (or Dark Green Cardstock), use the Floral Circle Punch to punch a circle and then trim as shown.  Use the Custom Cutting System with the smallest Circle Pattern and Red Blade on the outside edge to cut a circle from White Cardstock.  Trim as shown and adhere to the floral circle piece.  Add faux stitching with a Dual-Tip Black Pen.
5.  Mat a photo with White Cardstock measuring 4-1/4″ x 6-1/4″.
6.  Add embellishment pieces with Foam Squares as shown.

 

KarynCropsNSDLayouts - Page 004

Although I didn’t grow strawberries, my blueberry bushes exploded with an abundance of berries this year!  I found myself competing with the backyard wildlife, and I had to hustle to pick my ripe berries before the birds and squirrels ate them.  My battle with the birds inspired my next layout that features a row of birds sitting above the strawberry patch.  The lovely Songbirds Border Punch has been one of my favorite CM punches this past year.

 

KarynCropsNSDLayouts - Page 002

To make my layout:

1.  Cut a piece of strawberry paper to 12″ x 4″ and adhere to the bottom of the green striped paper.  I positioned my stripes to run horizontally.  Use the Original Border Maker System with the new Ruffle Trim Border Maker Cartridge to punch a border from Scarlet Cardstock, and adhere to the strawberry strip.
2.  Cut a piece of Scarlet Cardstock to 9-1/4″ x 10″.  From the center of your piece, use the Custom Cutting System with the small heart pattern from the Gemstone Cutting Patterns and Green Blade on the outside edge to cut two heart photo mats.  Also cut a 4-1/4″ x 6-1/4″ piece to use as a photo mat.  When cutting these pieces, make sure to leave an edge around your cardstock as you will use this now hollow piece as a frame for the leftover gray dot piece from the first layout (See my post from August 7th.)  The gray dot piece measures 9″ x 9″, so position it towards the bottom of the scarlet frame piece.
3.  From Evergreen Cardstock (or Dark Green Cardstock) punch a 9″ border using the Lace Trim Border Punch.  Cut off of your cardstock at 2″.  Position this piece on top of the gray dot piece leaving the Scarlet Cardstock frame showing.
4.  Use the Songbirds Border Punch to punch a row of birds from Evergreen Cardstock.
5.  Adhere pieces as shown and add stickers and embellishments as shown.  I used Foam Squares for my ribbon pieces at the top of the layout.

 

KarynCropsNSDLayouts - Page 008

My last layout evokes another garden scene of picking strawberries.  I created a strawberry patch with the On the Vine Border Punch and heart punch outs.  The sweet little basket was inspired by my scrapping buddy, Fran Smitherman, who shared several ideas for creating baskets on our Creative Life Scrapbooking Facebook page.

 

KarynCropsNSDLayouts - Page 006

To make my layout:

1.  Cut a 12″ x 3″ piece of strawberry paper and adhere to the top of the gray dot paper.  Use the Original Border Maker System with the new Ruffle Trim Border Maker Cartridge to punch a border from Scarlet Cardstock, and adhere to the strawberry strip.
2.  Use the On the Vine Border Punch to punch a border from Evergreen Cardstock (or Dark Green Cardstock).  Adhere to the bottom of the page.  Use the Original Border Maker System with the Heart Duet Border Maker Cartridge to punch hearts from Scarlet Cardstock.  Use a black pen to add detail to the hearts and adhere over the circles in the vine piece.
3.  Use the Floral Circle Punch to punch a piece from White Cardstock and trim as shown. Adhere to top of the page.
4.  Add two 4-1/4″ x 6-1/4″ photo mats from Scarlet Cardstock.
5.  Use the Basketweave Border Punch to punch a piece from Brown Cardstock.  Trim with scissors as shown.  To create the handle, use the Custom Cutting System with the medium sized Circle Pattern and the Blue and Red Blades to cut a hollow frame piece.  Cut on the inside edge with the Blue Blade first and then without moving the cutting pattern, cut again with the Red Blade.  Trim with scissors to fit the basket piece.
6.  Add stickers, embellishments and a bird punched with the Songbirds Border Punch. Adhere some with Foam Squares as shown.

 
I hope you like these super sweet pages!  Don’t feel like you need “strawberry” photos for them.  Just use photos of your family members – or maybe stage some photos eating strawberry shortcakes or strawberry ice cream : )

Please note that the new Ruffle Trim Border Maker Cartridge sold out during CM’s promo last month. CM has ordered more of this cartridge, and it is expected to be back in stock in November.  To place an order, please use my Creative Memories website link.

Thanks so much for visiting with me, and I’ll be back at the end of the month with the Creative Life Scrapbooking 2020 Summer Blog Hop!

Karyn

2 thoughts on “National Scrapbook Day Layouts – Part 2

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s